Tremie Pipe - 100mm ID

Tremie pipes are used to place concrete below water or ground level. The sections of pipe are screwed together and the resulting pipeline is raised and shortened as the pour progesses.



Product Image Item Name+ Price
Lifting cap

Lifting cap

Tremie lifting cap Male tremie thread - 16mm ID  lifting eye to accomodate D Shackle
Contact Us
Tremie 100 Hopper

Tremie 100 Hopper

Tremie Hopper assembly. 600mm x 600mm hopper c/w lifting eyes or handles as required. Screws onto middle & bottom 100mm tremie sections. Designed and manufactured by Pump Parts Ltd on our premises in the UK.  
Contact Us
Tremie Pipe 100mm ID Bottom Section 2000mm

Tremie Pipe 100mm ID Bottom Section 2000mm

Tremie Pipe 100mm ID, Bottom Section, c/w Female Thread (one end only), 2000mm long, 1.5mm wall  ( Joint requires minimum Re-Bar aperture of 114mm and tip requires only 102mm )  
Contact Us
Tremie Pipe 100mm ID Middle Section 2000mm

Tremie Pipe 100mm ID Middle Section 2000mm

Tremie Pipe 100mm ID, Middle Section, c/w 1 x Male and 1 x Female Thread, 2000mm long, 1.5mm wall   ( Joint requires minimum Re-Bar aperture of 114mm )  
Contact Us
Tremie Pipe 100mm ID Middle Section 3000mm

Tremie Pipe 100mm ID Middle Section 3000mm

Tremie Pipe 100mm ID, Middle Section, c/w 1 x Male and 1 x Female Thread, 3000mm long, 1.5mm wall  ( Screwed Joints require minimum Re-Bar aperture of 114mm )  
Contact Us
Tremie Pipe 100mm ID Top Section 2000mm

Tremie Pipe 100mm ID Top Section 2000mm

Tremie Pipe 100mm ID, Top Section, c/w Lifting eye and 1 x 127mm Victaulic Collar and 1 x Male Thread, 2000mm long, 1.5mm wall.  ( Screwed Joints require minimum Re-Bar aperture of 114mm )  
Contact Us
Tremmie Pipe 100mm Suspension Jig

Tremmie Pipe 100mm Suspension Jig

Tremmie Pipe 100mm Suspension Jig Can simply be installed with two lenghts of scaffold pole or re-bar, to rest on shuttering  
Contact Us