All ProductsDetails:Tremie Hopper assembly. 600mm x 600mm hopper c/w lifting eyes and shuttering bracket. Screws onto 75mm middle & bottom tremie sections. Shuttering bracket can simply be installed with two lengths of scaffold pole or re-bar, as illustrated. Designed and manufactured by Pump Parts Ltd on our premises in the UK. Details:Tremie Pipe 100mm ID, Bottom Section, c/w Female Thread (one end only), 2000mm long, 1.5mm wall ( Joint requires minimum Re-Bar aperture of 114mm and tip requires only 102mm ) Details:Tremie Pipe 100mm ID, Middle Section, c/w 1 x Male and 1 x Female Thread, 2000mm long, 1.5mm wall ( Joint requires minimum Re-Bar aperture of 114mm ) Details:Tremie Pipe 100mm ID, Middle Section, c/w 1 x Male and 1 x Female Thread, 3000mm long, 1.5mm wall ( Screwed Joints require minimum Re-Bar aperture of 114mm ) Details:Tremie Pipe 100mm ID, Top Section, c/w Lifting eye and 1 x 127mm Victaulic Collar and 1 x Male Thread, 2000mm long, 1.5mm wall. ( Screwed Joints require minimum Re-Bar aperture of 114mm ) Details:Tremie Pipe 75mm ID, Bottom Section, c/w Female Thread (one end only), 2000mm long, 1.5mm wall ( Joint requires minimum Re-Bar aperture of 88mm and tip requires only 76mm ) Details:Tremie Pipe 75mm ID, Middle Section, c/w 1 x Male and 1 x Female Thread, 2000mm long, 1.5mm wall ( Joint requires minimum Re-Bar aperture of 88mm ) Details:Tremie Pipe 75mm ID, Top Section, c/w Lifting eye and 1 x 97mm Victaulic Collar and 1 x Male Thread, 2000mm long, 1.5mm wall ( Screwed joints require minimum Re-Bar aperture of 88mm ) Details:Tremie Pipe 75mm ID, Top Section, c/w Lifting eye and 1 x 97mm Victaulic Collar, 3000mm long, 1.5mm wall ( Joint requires minimum Re-Bar aperture of 88mm ) Details:Tremmie Pipe 100mm Suspension Jig Can simply be installed with two lenghts of scaffold pole or re-bar, to rest on shuttering |
Please Call Us On: 01367 710063
